plastics.dupont.com DuPont - The Miracles of Science
Search DuPont
    Go  
产品
Crastin® PBT热塑性聚酯树脂

E-mail Us

Decoration by sublimation of 3-D plastics parts goes commercial

Hemel Hempstead, December 14, 2005 — The first application of DuPont Engineering Polymers’ new dye-sublimation technology for decorating complex-shaped plastics parts moulded from semi-crystalline engineering polymers is about to go commercial. Tefal’s Color Click electric kettle, whose outer shell is made of DuPont™ Crastin® PBT polyester resin and decorated with different colours and patterns by means of dye sublimation, will be in the shops by Christmas.

“This economic, efficient way to apply sophisticated multi-colour images, photographs or patterns onto three-dimensional plastics substrates of complex shape opens new ways for manufacturers to enhance their products’ aesthetic appeal,” says Christophe Chervin, development specialist at DuPont’s European Technical Centre in Geneva, Switzerland.

Sublimation is a process whereby a solid substance is converted into gas without passing through an intermediate liquid phase. Many industries use dye sublimation to transfer images or patterns from a carrier onto a variety of substrates, including textiles, by means of heat and pressure.

Decoration of plastics by sublimation is not new. However, its use was until now limited to surfaces of simple geometric shape: flat or cylindrical parts. This was because conventional dye carriers – paper or plastic film – cannot be applied smoothly onto complex shapes. Stretchable dye carriers overcome this difficulty, but often produce blurred results, especially over tight curves and sharp edges. Now DuPont’s new process uses a patented dye-carrier which adheres smoothly onto 3-D curved parts and complex geometries without wrinkling, producing high-precision patterns.

On semi-crystalline plastics, such as DuPont™ Crastin®, DuPont™ Delrin®, DuPont™ Hytrel®, DuPont™ Rynite® and DuPont™ Zytel®, sublimated dyes penetrate into the material to a depth of between 0.2 and 0.3 mm. This makes the decoration highly resistant to wear, scratches and abrasion. On amorphous plastics, such as ABS and polycarbonate, the dye does not penetrate and can be scratched off easily.

In Tefal’s patented design, the Color Click kettle has a removable two-part outer shell which is curved in three dimensions. Various models are decorated with different colours and patterns by means of dye sublimation. “These interchangeable shells give the Color Click kettle greater aesthetic appeal,” explains Christian Dupuy, product manager at Tefal. “The user can change these shells at will, to suit the mood of the moment. The kettle is sold with one or two pairs of shells, depending on the country of sale; further pairs of shells, with different colours, designs and textures, are sold separately.”

The shells, made of DuPont™ Crastin® PBT, have a high-gloss surface. Sublimation produces a permanent image on this material, Dupuy says; the pattern remains sharp, the colours are not affected by the kettle’s heat and the surface is resistant to scratching and abrasion.

Sublimation can produce an almost unlimited range of effects on plastics, such as wood, marble, or lace; the surface can be glossy or grainy, the colours light or dark. “As a way to add value to plastics parts, the process has great potential in many industries,” adds Chervin. “In the clothing industry, for example, zippers can be coloured and patterned, to go with the rest of the garment; in the cosmetics and furniture industries, possibilities are limitless.”

DuPont developed the 3-D sublimation process for semi-crystalline plastics in partnership with Pacific Colour, of Lons-le-Saunier, France, for the sublimation printing of the Tefal kettle shells, and with Sublistatic International, of Hénin-Beaumont, France, for the printing of the dye-carrier.

The DuPont Engineering Polymers business manufactures and sells Crastin® PBT and Rynite® PET thermoplastic polyester resins, Delrin® acetal resins, Hytrel® thermoplastic polyester elastomers, DuPont™ ETPV engineering thermoplastic vulcanizates, Minlon® mineral reinforced nylon resins, Thermx® PCT polycyclohexylene dimethyl terephthalate, Tynex® filaments, Vespel® parts and shapes, Zenite® LCP liquid crystal polymers, Zytel® nylon resins and Zytel® HTN high-performance polyamides. These products serve global markets in the aerospace, appliance, automotive, consumer, electrical, electronic, industrial, sporting goods and many other diversified industries.

DuPont is a science company. Founded in 1802, DuPont puts science to work by creating sustainable solutions essential to a better, safer, healthier life for people everywhere. Operating in more than 70 countries, DuPont offers a wide range of innovative products and services for markets including agriculture, nutrition, electronics, communications, safety and protection, home and construction, transportation and apparel.

X X X

The DuPont Oval logo, DuPont™, The miracles of science™ and all product names denoted with ® are trademarks or registered trademarks of DuPont or one of its affiliates.

EP-EU-2005-25
December 2005

Tefal/T-Fal are registered trademarks of Groupe SEB.

Click here and save to download a 300dpi JPEG image of the photo.

This press release has been prepared with information from:

Tefal
BP 89
F-74156 Rumilly
Contact: Christian Dupuy
Tel: 33 384 79 40 95
email: cdupuy@tefal.fr

Pacific Colour
355 rue des Frères Lumière
F-39000 Lons-le-Saulnier
Contact: Jean-François Chalumeau
Tel: +33 384 47 22 42
email: j.f.chalumeau@pacific-colour.com

Sublistatic International
1535 Bvd Darchicourt
Z. I. La Peupleraie
F-62256 Hénin-Beaumont
Contact: Mme Béatrice Henninot
Tel: +33 321 79 79 53
email: bhenninot@sublistatic.com

For PRESS information

Legal Notices & Terms of Use Privacy Site Map About Us